Arizona Construction Equipment,Inc. - 1(602)257-0802
NEW FAB TEC WASH MASTER PLANT WITH BELT FEEDER, 10 CY HOPPER & 10 FUNCTION REMOTE CONTROL OPERATION

PRO 5X16 3 DECK INCLINE SCREEN:
  1. 20 HP TEFC with pivot motor base and power and belt.
  2. 2" top deck, 7/8" middle deck, 3/8" bottom deck screen cloth.
  3. 3/8" PL side walls, with 2"x3" angle iron reinforcement on edges.
  4. Hutch bolted screen decks, constructed of 4"x3"x3/8" angle iron and 3"x2" rectangular tubing, 1/2"x3" FB crown bars.
  5. AR lined discharge lips.
  6. Alco high temper isolation springs.
  7. 100 MM Torrington spherical bearings specially designed for shaker screens.
  8. Center support tube 9" with 1/2" wall and 2" thick flanges.
  9. FAB TEC designed cartilage style bearing housings, very heavy duty with 1 1/4" wall thickness.
  10. Eccentrics with add on weights.
  11. 10" WF sub frame 33# with 8" CL 13.75# cross members.
  12. Standard side tension formed clamp bars and 1/2" crown bar rubbers.
  13. Hydraulic raising and lowering of the screen to operating and travel position.
TRIO 36"X25' SANDSCREW:
  1. 15 HP TEFC Toshiba Moter.
  2. Greasable lower bearing, rubber sealed with bearing spacer for trouble free use.
  3. Extra thick replaceable wear plates, tube & sprial.
  4. 100 TPH 3/8" maximum material size 3/8".
10 CUBIC YARD FEED HOPPER WITH 1/4" BOLT-IN AR LINERS:
30"x10' VARIABLE SPEED BELT FEEDER:
  1. 10 HP TEFC Motor.
  2. 47 FPM belt speed, weighted feed gate.
  3. Belt drive is high torque with double reduction for proper speed.
  4. Vulcanized lagged head pulley and winged type self cleaning tail pulley with Dodge SCM bearings.
  5. 3 ply 1/4"x1/16" belting.
  6. CEMA C idlers.
  7. Variable frequency drive.
30"x38' SCREEN FEED CONVEYOR:
  1. 10 HP TEFC Motor.
  2. Vulcanized lagged head pulley and winged type self cleaning tail pulley with Dodge SCM bearings.
  3. 3 ply 3/16"x1/16" belting.
  4. Hydraulic raising and lowering of the conveyor to operating and travel position.
POWER PACKAGE:
  1. Perkins 4 cylinder diesel engine.
  2. Newage 150 KW Continuous power generator.
  3. 120 Gallon diesel fuel tank.
  4. Plant mounted NEMA 12 enclosure switch gear (ABB IEC starters) with stop/start buttons.
  5. Start-up warning horn system.
  6. Extra auxiliary starters for up to three 15 HP stockpiling conveyors and one 25 HP power radial stacker.
  7. Extra starter for 25 HP water pump motor; pump not included.
THREE (3) AR LINED DISCHARGE CHUTES WITH EASY EXCESS TO PRODUCT CONVEYOR.

TWELVE (12) SPRAY BAR WASH SYSTEM
  1. Brass "Vee Jet" nozzles, 1 1/2" spray bars.
  2. Brass individual gate valves for each spray bars.
  3. Full length water mainfold with inlet pipe and flange.
  4. Maximum capacity 657 GPM at 60 PSI.
  5. Slurry feed box at the end of the feed conveyor with water jets.
  6. Hydraulic raising & lowering of the slurry feed box.

18" WALKWAYS BOTH SIDES OF SCREEN & BACK 48" PLATFORM,
SKYWALK FLOOR AND 3" TOE BOARDS, 42" SOLID HANDRAILS WITH ACCESS LADDER.

TANDEM AXLE CARRIER 16" WF BEAMS 50#
  1. Hutch 9700 series suspension.
  2. 22,500# Standard forge axles.
  3. 11:00x22.5 Tires, ten hole Budd Wheels.
  4. Standard 5th wheel plate, lights, & mud flaps.
  5. Hydraulic Leveling.
  6. 16" leg extensions for additional blocking when needed.

SAFETY GUARDS PROVIDED. Local regulations may require additional guards.
RUST INHIBITOR PRIMER AND TWO FINISH COATS OF PAINT.

TRAVEL HEIGHT 14'6", OPERATING HEIGHT 18' 7-1/16", WIDTH 10', LENGTH 60'5".
AXLE WEIGHT - 42,760#.
PIN WEIGHT - 27,000#.
TOTAL WEIGHT- 69,760#.

PRICE: $314,500
F.O.B.: Phoenix, AZ
MONTHLY RENTAL RATE: $22,000

Arizona Construction Equipment,Inc. - 1(602)257-0802
Picture I - Transport Position - No hydraulic grizzly option.


Arizona Construction Equipment,Inc. - 1(602)257-0802
Picture II - Transport Position - No hydraulic grizzly option.


Arizona Construction Equipment,Inc. - 1(602)257-0802
Picture III - Transport Position - No hydraulic grizzly option.


Arizona Construction Equipment,Inc. - 1(602)257-0802
Picture IV - Transport Position - No hydraulic grizzly option.


Arizona Construction Equipment,Inc. - 1(602)257-0802
Picture V - Transport Position - No hydraulic grizzly option.


Arizona Construction Equipment,Inc. - 1(602)257-0802
Picture VI - Operating Position.


Arizona Construction Equipment,Inc. - 1(602)257-0802
Picture VII - Screen & Conveyor raised to operating position.


Arizona Construction Equipment,Inc. - 1(602)257-0802
Picture VIII


Arizona Construction Equipment,Inc. - 1(602)257-0802
Picture IX


Arizona Construction Equipment,Inc. - 1(602)257-0802
Picture X - 150 KW Generator with switchgear.


Arizona Construction Equipment,Inc. - 1(602)257-0802
Picture XI - Screen & Conveyor lowered to travel position.


Arizona Construction Equipment,Inc. - 1(602)257-0802
Picture XII - 2nd plant W/O Hydraulic Grizzly.


Arizona Construction Equipment,Inc. - 1(602)257-0802
Picture XIII - Plant Layout


Arizona Construction Equipment,Inc. - 1(602)257-0802

Click for typical plant layout drawing.